ASSEMBLY SPRAY CARBOGRIP 75ML EFFETTO MARIPOSA

Carbogrip is a synthetic resin for the assembly of carbon parts. Applied, it creates a grippy surface that promotes stability. It’s also great as threadlocker and to eliminate creaking in the bottom bracket area.

EXCLUSIVE FEATURES:
- It’s anti-slip: avoids unwanted movements of clamped components
- It’s anti-seizing: allows the removal of any component, even after a long time
- It’s effective against creaking of Press-Fit bottom brackets
- It’s perfect as thread locker for metal or composite bolts
- It’s water-proof: it remains effective for a long time
- It’s an electric insulator: prevents galvanic corrosion and cold welding between metals
- Doesn’t scratch carbon parts and can be completely removed

How it works
- When the clamping force is applied, the anti-slip layer of Carbogrip prevents the component from moving. On the other hand, when the clamping force is released, Carbogrip - thanks to its anti-seizing characteristics - allows an easy removal of the component.

Effective for a long time
- With the passing of time and with repeated washing, some assembly components lose their properties. Not Carbogrip, because it creates a very stable and effective layer with the following features:
- It’s waterproof: if used on a seat-post, it prevents water from getting into the frame;
- It’s an electric insulator: avoids galvanic corrosion/cold welding between different metals;
- It’s resistant to very high temperatures: in cycling applications, the resin won’t melt or migrate nor change its properties.

Carbogrip can be easily removed using Carbomove or another petrol-based solvent (e.g. aviation spirit, Hexane).

Many application for Carbogrip
- Originally created as a synthetic resin for assembly carbon components, since the very beginning Carbogrip has been a worthy ally for cycling mechanics, excelling in different applications:
- It’s great as threadlocker (for steel, titanium, aluminium, carbon bolts);
- It’s ideal for neoprene mountain bike grips: applied on the internal grip surface, it makes sure the grip easily slides onto the handlebar, locking it in place after a few minutes. The grip can then be removed blowing air inside with a compressor;
- Spread on the bead of tubeless tyres, it prevents any movement with low-pressure riding;
- If applied on the frame when assembling the bottom bracket, it’s great to prevent noises or creaking in the BB area (both threaded and press-fit BBs);

How to use Carbogrip as an assembly compound
- Carefully clean/degrease the assembling surfaces. If assembling a seat-post be sure to remove any grease trace inside the seat tube too;
- Apply Carbogrip on the component and immediately assemble it;
- Tighten the mounting bolts at the suggested torque value;
- Wait 3-5 minutes before using the component;
- Unwanted Carbogrip traces can be removed with Carbomove or another petrol-based solvent.

Packaging:
- 75 ml spray canister